NRG SBH-B6PCSL 5-Point Cam-Lock Racing Seat Belt Harness Silver SFI 16.1 3in
Universal Fitment - Compatible with any vehicle equipped with a roll cage or harness bar allowing proper 5-point bolt-in or wrap-around harness mounting points. This is a universal racing harness - a compatible roll cage, harness bar, or OEM-style anchor points are required for proper and safe installation. Shoulder belts can be mounted bolt-in (floor/cage mount) or wrap-around style depending on the application.
Lap belts and submarine belt are bolt-in style - floor-mount anchors are required. Not a direct replacement for factory OEM seat belt systems - professional installation is strongly recommended. SFI certification is valid for 2 years from the date of manufacture per standard racing regulations - confirm SFI date tag before use in sanctioned events. Not intended for street use in vehicles equipped with factory airbag or SRS systems.
SFI 16.1 certified - meets or surpasses USAC, NASCAR, SCCA, and other major sanctioning body safety standards; SFI date tags are affixed to the harness. Heavy-duty cam-lock buckle provides fast, one-motion engagement and release, essential for quick driver exit in emergency situations. 3-inch wide shoulder and lap straps distribute restraint load evenly across the driver's body for improved safety and comfort under high-g driving conditions.
2-inch anti-submarine strap prevents the driver from sliding forward and under the lap belt during hard braking or front-impact events. Individual shoulder harness design (as opposed to a single Y-shoulder) provides superior shoulder support and proper belt routing geometry. Pull-down belt adjustment allows for easy, precise tightening of all belts while seated. NRG gradient logo belting with integrated padded shoulder cushions reduces pressure points and increases comfort during extended driving sessions or track days.
Premium polyester webbing with double-stitched construction for maximum tensile strength and long-term durability. Silver color provides a clean, professional appearance that pairs well with a wide range of interior builds.Available in bolt-in or wrap-around mounting configurations for flexible installation across different chassis and roll cage setups. Shoulder Belt Width: 3.00 in. Lap Belt Width: 3.00 in. Anti-Submarine Belt Width: 2.00 in.
Shoulder Harness Type: Individual (separate left and right). Shoulder Belt Mounting Style: Bolt-in or Wrap-around. Lap Belt Mounting Style: Bolt-in. Anti-Submarine Belt Mounting Style: Bolt-in. Belt Material: Reinforced polyester webbing, double-stitched.1x Left shoulder strap with padded cushion. 1x Right shoulder strap with padded cushion.
1x Anti-submarine (crotch) strap - 2 in. 1x Heavy-duty cam-lock center buckle.
The NRG SBH-B6PCSL is a complete 5-point SFI 16.1 certified racing harness designed to keep drivers securely positioned during high-performance driving, track events, and motorsport competition. The heavy-duty cam-lock buckle at the center of the harness allows all five belt points to connect and disconnect in a single action, providing both security during driving and rapid exit capability in an emergency. The individual left and right shoulder straps route properly over the driver's shoulders without crossing, delivering better load distribution and more accurate belt geometry compared to Y-strap designs. All straps are constructed from premium double-stitched reinforced polyester webbing built to withstand the extreme loads generated during hard braking, cornering, and impact events.The 3-inch shoulder and lap straps spread restraint forces across a wide area of the body, while the 2-inch anti-submarine strap anchors the lap belt and prevents the driver from sliding under the harness forward in a collision. NRG's gradient logo shoulder pads are integrated into the harness to reduce friction and pressure during extended use. Pull-down adjustment on all belts allows for quick, precise tightening once seated, and the shoulder straps can be configured for bolt-in floor mounting or wrap-around cage mounting depending on the build.
The SBH-B6PCSL is a universal harness and requires a properly configured roll cage, harness bar, or chassis-mounted anchor points for safe installation - it is not a direct swap for any factory seat belt system. SFI 16.1 certification is confirmed with date tags affixed directly to the harness, and the certification is valid for two years from the manufacture date in accordance with standard racing regulations.
This harness is ideal for track cars, drift builds, drag cars, autocross vehicles, off-road rigs, and any performance application where driver safety and restraint quality are a priority. Your complete shopping satisfaction is our #1 priority. If you have any issues with your order, please let us know. We will make every effort to resolve any problems and ensure you are satisfied. Thank you again for choosing to shop with us!